3 watt surface-mounted emergency lighting OTG-KL series

The emergency lighting series OTG-KL with transparent shade is our best-selling emergency lighting because of the competitive price-quality ratio. The luminaires are equipped with 16 LEDs. They come with 4 icons with the following arrow directions: left, right, up and down. You can paste the icon on the fixture that applies to your situation. The luminaires have a transparent cover. All luminaires have a test button so that you can manually check whether the battery is working. We also have the battery pack that is in this fixture separately in stock, for if you want to replace it in the future. Click here if you are looking for the OTG-KL series with milky white shade.

There are five variants of this fixture in 3 watts with transparent cap:

1) OTG-KL-1 in the light color 6000K (cold white) with standard Ni-Cd battery (1500mAh).

2) OTG-KL-2 in the light color 6000K (cold white) with environmentally friendly Ni-Mh battery (1800mAh).

3) OTG-KL-4 in the light color 4000K (neutral white) with standard Ni-Cd battery (1500mAh).

4) OTG-KL-5 in the light color 3000K (warm white) with standard Ni-Cd battery (1500mAh).

5) OTG-KL-7 with autotest function in the light color 6000K (cold white) with standard Ni-Cd battery (1500mAh).

Additional icons
It is possible to order a separate icon set, consisting of 8 icons, with this fixture.

Installation
The LED emergency lighting can be mounted above doors, windows and on walls. In consultation with a specialist, you can see in how many places you need emergency lighting and how you can mount it. On the back and the 4 sides of the fixture are marked circles that you can pierce. After you have drilled a hole, you can connect the wiring to the crown stone attached to the circuit board. This is how you connect the luminaire to the electricity grid (230V). To make the hole resistant to water damage, you can mount a pg9 strain relief in the drilled hole so that you then run the wiring. In this way you protect the luminaire against water damage and in addition, the strain relief ensures that the cord cannot be disconnected from the crown stone.

Continuous or non-continuous
The luminaire is equipped with 16 LEDs. The luminaires can be set to continuous (permanent lighting) or emergency (non-permanent or non-continuous emergency lighting). If the luminaire is set to continuous, the light will be on even if there is no power failure. If you set the luminaire to not continuous, the light will only switch on when the luminaire no longer receives power from the mains and then it will remain on for at least 3 hours. Three hours is usually sufficient for employees and visitors to leave a building and also falls within the legal standard.

CE approved
All our emergency lighting models are CE approved and meet the standards and requirements that apply in Europe. The housing and diffuser are made of high-quality plastic.