Dimmer switch incl. remote control - up to 500W

This dimmer set (including remote control) can be used with all of our dimmable festoon belt lighting. It is also suitable to use with our LED strip lighting and LED neon light tubes. Attention: this product does not work in combination with LED lighting from other suppliers. The dimmer set includes a 3 metres cable.

This dimmer set is suitable for festoon belts for which the total wattage does not exceed 500 watt.
For example: the dimmer can be used with a festoon belt in which up to 250 2 watt bulbs have been placed.

The included remote control has the following functions:

• Controllable from a distance of 15-20 metres.
• Turn the lights on or off.
• Gradually adjust the light, using the plus and minus buttons.
• Use the pre-programmed settings to dim your lights to 25%, 50% or 75%.
• Use the timer to automatically turn off your lights after 30 minutes, 1 hour, 2 hours, or 4 hours.

The radio frequency of the dimmer is universal. If your neighbors use the same dimmer set, it may affect the frequency of the neighbors.

Note: This dimmer set includes a remote control. Are you looking for a replacement for your current remote control? Since October 26, 2021 we have released a dimmer with a new article number. The remote control only works in combination with the matching dimmer. Please refer to the table below. Have you ever received a replacement or have no idea which dimmer you have in your possession? If in doubt, do not hesitate to contact our customer service.

This dimmer has an IP value of 44, and is therefore suitable for outdoor use. We would like to advise you to thoroughly secure the connection between the dimmer and the plug, as this will always be the weakest link when using the dimmer and plug outdoors.